[Offer to Sell]

Mixing Mill Machine, Rubber Mixing Mill,Plastic Mixing Mill, Open Mixing Mill, Two-Roller Rubber Mixing Mill Machine

Mixing Mill Machine, Rubber Mixing Mill,Plastic Mixing Mill, Open Mixing Mill, Two-Roller Rubber Mixing Mill Machine
Product Name: Two-Roll Open Rubber Mixing Mill Machine
Functions and usages: two-roll open mixing mill machine is used for mixing and kneading raw rubber materials, synthetic rubber, thermoplastics or EVA with chemicals into every materials.
Simple description: This machine is two-roll open mixing mill, consists of base, rack, rolls, driving system, lubricating system, cooling system, roll clearance adjustments device, safety brake device, motor, reducer, etc( refer to the outline diagram for details). The rolls are made of chilled cast iron, and the surfaces are grinded to very smooth surfaces. The rollers inside are hollow, and can be heated by steam or cooled by water according to different requirements. Colloidal particles are drawn into the gap of the two rollers which make relative rotation in different velocity to mix rubber.
Manufacturer:
John AT sinorubbermach DOT com
Skype:jihejunjohn
Technical Parameters:
Type XK-250
Working diameter of roller Φ250mm
Working length of roller 620mm
Working speed(front roller) 15.1
Friction ratio of front and rear roller 1:1.1
Capacity per.batch 10-15kg
Driving motor power 18.5KW
Overall size (L×W×H) 3400×1350×1500mm
weight 3500kg
Note Nylon bush use grease for lubricating
Copper bush and rolling bearing bush use grease and oil for lubricating.
Type XK-360
Working diameter of roller Φ360mm
Working length of roller 900mm
Working speed(front roller) 16.25
Friction ratio of front and rear roller 1:1.25
Capacity per.batch 20-25kg
Driving motor power 30KW
Overall size (L×W×H) 3940×1780×1740mm
weight 5670kg
Note Nylon bush use grease for lubricating
Copper bush and rolling bearing bush use grease and oil for lubricating.
Type XK-400
Working diameter of roller Φ400mm
Working length of roller 1000mm
Working speed(front roller) 18.65
Friction ratio of front and rear roller 1:1.27
Capacity per.batch 18-35kg
Driving motor power 37KW
Overall size (L×W×H) 4200×1850×1870mm
weight 7600kg
Note Nylon bush use grease for lubricating
Copper bush and rolling bearing bush use grease and oil for lubricating.
Type XK-450
Working diameter of roller Φ450mm
Working length of roller 1200mm
Working speed(front roller) 24.5
Friction ratio of front and rear roller 1:1.27
Capacity per.batch 25-50kg
Driving motor power 55KW
Overall size (L×W×H) 5200×2380×1770mm
weight 12000kg
Note Nylon bush use grease for lubricating
Copper bush and rolling bearing bush use grease and oil for lubricating.
Type XK-560
Working diameter of roller Front roller Φ560mm Rear roller Φ510mm
Working length of roller 1530mm
Working speed(front roller) 27.7
Friction ratio of front and rear roller 1:1.2
Capacity per.batch 50-60kg
Driving motor power 90KW
Overall size (L×W×H) 6500×2300×2000mm
weight 19500kg
Note Nylon bush use grease for lubricating
Copper bush and rolling bearing bush use grease and oil for lubricating.

This machine is used for mixing and kneading raw rubber,synthetic rubber,thermoplastics or EVA with chemicals into even materials.The every materials can be fed to calender ,hot presses or other processing machinery for making rubber or plastic products.It adopts hollow center groove roller or drilling hole smooth roller against difference using scope as mixing,refining or press pieces etc.This machine can be installed stock blender according to customer’s request to decrease the labor strength,also equipped with safety device.
Type XK-550B
Working diameter of roller 550mm
Working length of roller 1500mm
Working speed(front roller) 27.94m/min
Frication ratio of front and rear roller 1:1.22
Capacity per.ba

---